Here's a step-by-step tutorial on how to replace the CPU and GPU Fans in a ASUS ROG/TUF A15 A17 using compatible fan models like:
✅Part Number: 5F10S73401 5F10S73403
✅Model: DC28000FLV0 DC28000FLT0
🔧 How to Replace the ASUS ROG/TUF A15 A17 (A15 FA506IH/ A17 FA706IH/ F17 FX706LI/ FX505DD/ FX705DD/ TUF765GE/ TUF505DD)
⚠️ Disclaimer
This process involves disassembling your Laptop. Doing so may void the warranty. Proceed only if you're comfortable with delicate electronics and static safety.
🧰 Tools and Materials Needed
Phillips screwdriver (size PH0 or PH1)
Plastic spudger (optional but helpful)
Thermal paste (new)
Isopropyl alcohol & lint-free cloth
Replacement fan: DFS5K12114262H DFS5K12304363H EP 1323-01AW0A2
Anti-static wrist strap (recommended)
🔌 1. Power Off and Unplug
Shut down the Laptop completely.
Unplug the power adapter and all connected cables.
Press and hold the power button for a few seconds to discharge remaining power.
📦 2. Remove the Bottom Cover
Turn the Laptop upside down.
Use a Phillips screwdriver to remove the four screws from the bottom.
Carefully lift off the bottom cover.
💽 3. Remove the SSD and RAM (Optional but Safer)
If needed, remove the M.2 SSD and RAM to prevent damage.
Set them aside in anti-static packaging or on a clean surface.
🧱 4. Remove the Mainboard
Disconnect all internal cables (fan, front panel, etc.).
Unscrew the board mounting screws.
Gently slide or lift the motherboard out of the case. Be careful of connectors underneath.
❄️ 5. Locate and Remove the CPU and GPU Fans
The fan is mounted on top of the heatsink.
Disconnect the fan cable from the motherboard.
Remove the screws holding the fans in place.
Carefully lift the fans off.
🧼 6. Clean the Heatsink and CPU/GPU
Remove any old thermal paste from the CPU and heatsink using isopropyl alcohol and a lint-free cloth.
Let everything dry.
🔁 7. Install the New Fans
Place the new fans on the heatsink.
Align screw holes and secure it with screws.
Reconnect the fan cables to the motherboard.
Apply a small amount (pea-sized) of new thermal paste to the CPU and GPU.
🧩 8. Reassemble the Laptop
Carefully place the motherboard back into the chassis.
Reconnect internal cables.
Reinstall the SSD and RAM if you removed them.
Close the case and screw the bottom cover back on.
⚙️ 9. Test the System
Plug in the power and boot the Laptop.
Enter the BIOS to verify that the fan is detected and spinning.
Monitor CPU/GPU temperatures using software like HWMonitor or Intel Power Gadget.
🎉 Done!
You’ve successfully replaced the CPU and GPU Fans in your ASUS ROG/TUF A15 A17. Your system should now run cooler and quieter.